Hello,
I’ve just used the desktop application to restore a backup.
I noticed a little oversight in the “Restore” section of the “Backup/Restore” tab.
Step 2: Hold down button #6 on your OnlyKey for 5+ seconds and release. The light will turn off. You will notice the OnlyKey flashes red in config mode.
You should add that once the light turns off, we need to (re)enter the PIN (and then, the OnlyKey flashes red in config mode).
Thus, “step 2” becomes :
Step 2: Hold down button #6 on your OnlyKey for 5+ seconds and release. The light will turn off. Then re-enter your PIN. You will notice the OnlyKey flashes red in config mode.
It may seem trivial. But when you don’t use the application for one year… you forget about the lights… I add to read the documentation (OnlyKey DUO User's Guide | Docs) to find out why the OnlyKey did not flash red in config mode.
The Onlykey is, by far, the best key available !
Thanks for your really good job !