# Second Profile on OnlyKey Keypad

**URL:** <https://onlykey.discourse.group/t/second-profile-on-onlykey-keypad/1002>\
**Category:** Uncategorized\
**Created:** [February 18, 2023, 11:39am UTC](https://onlykey.discourse.group/t/second-profile-on-onlykey-keypad/1002 "2023-02-18T11:39:44Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![crg](https://avatars.discourse-cdn.com/v4/letter/c/a9a28c/32.png) [@crg](https://onlykey.discourse.group/u/crg)\
**Post date:** [February 18, 2023, 11:39am UTC](https://onlykey.discourse.group/t/second-profile-on-onlykey-keypad/1002/1 "2023-02-18T11:39:44Z")

</div>

OnlyKey permits adding a second profile to store an additional 12 accounts (24 total). Set a 2nd Pin to access the 2nd profile. Second profile must be configured during initial setup and can´t be set up later. Could so far not find further info about 2nd profile and how to set it up, advice appreciated

---

<div class="post-metadata">

**Author:** ![Stammer9222](https://avatars.discourse-cdn.com/v4/letter/s/b9bd4f/32.png) [@Stammer9222](https://onlykey.discourse.group/u/Stammer9222)\
**Post date:** [February 18, 2023, 5:30pm UTC](https://onlykey.discourse.group/t/second-profile-on-onlykey-keypad/1002/2 "2023-02-18T17:30:31Z")

</div>

Did you try and just set the second pin in the app while in config mode?

That worked for me

---

<div class="post-metadata">

**Author:** ![crg](https://avatars.discourse-cdn.com/v4/letter/c/a9a28c/32.png) [@crg](https://onlykey.discourse.group/u/crg)\
**Post date:** [February 19, 2023, 11:09am UTC](https://onlykey.discourse.group/t/second-profile-on-onlykey-keypad/1002/3 "2023-02-19T11:09:09Z")

</div>

Hi, thank´s for the advice. Yes, I set the PIN for the 2nd profile but still don´t know how and where these 12 extra entries will be stored. Maybe You have a hint? It´s good with Forums but an additional mail-support (expert answers within 24hrs) would certainly be of great advantage - so far I miss this here … Regards crg

---

<div class="post-metadata">

**Author:** ![xokc](https://avatars.discourse-cdn.com/v4/letter/x/77aa72/32.png) [@xokc](https://onlykey.discourse.group/u/xokc)\
**Post date:** [February 19, 2023, 12:11pm UTC](https://onlykey.discourse.group/t/second-profile-on-onlykey-keypad/1002/4 "2023-02-19T12:11:44Z")

</div>

it depends which pin you enter.

there is a green and a blue profile.  
if you can setup the 2nd profile if you selected plausible deniability in the initial setup, I don’t really know if you actually can create a proper profile.

Anyway I think it should be possible, after you have a verified backup to just reset the device and initialize it with 2 profiles.  
In my experience the pin will persist, even if you replay the backup (it’s not bound to the backup)

---

<div class="post-metadata">

**Author:** ![crg](https://avatars.discourse-cdn.com/v4/letter/c/a9a28c/32.png) [@crg](https://onlykey.discourse.group/u/crg)\
**Post date:** [February 20, 2023, 12:00pm UTC](https://onlykey.discourse.group/t/second-profile-on-onlykey-keypad/1002/5 "2023-02-20T12:00:18Z")

</div>

Hi, thank´s for Your advice. Have set the PIN for the the 2nd Profile and the self destruction PIN but not tried to enter a 2nd Profile, might do it later. A serious issue is  
the Lock Button PC in Preferenses: I set it to #5 & was locked out, 10x unlock PIN = factory reset → a new Set up & Preferences. Advice: set it to zero since no reset button exists. More convenient is a set = 0 for the Inactivity lockout timer as well