# Hardware : physical buttons? **URL:** \ **Category:** Feature Requests\ **Created:** [December 26, 2020, 10:20pm UTC](https://onlykey.discourse.group/t/hardware-physical-buttons/159 "2020-12-26T22:20:48Z")\ **Posts on this page:** 7\ **Page:** 2
**Author:** ![PasTiGIN](https://avatars.discourse-cdn.com/v4/letter/p/a8b319/32.png) [@PasTiGIN](https://onlykey.discourse.group/u/PasTiGIN)\ **Post date:** [August 4, 2021, 12:25pm UTC](https://onlykey.discourse.group/t/hardware-physical-buttons/159/24 "2021-08-04T12:25:53Z")
@Extrawdw @t11 As this seems in copper, I suppose it will preserve the capacitive input as one of entropy sources due to the human body using it. ---
**Author:** ![bettyvschmartz](https://yyz2.discourse-cdn.com/free1/user_avatar/onlykey.discourse.group/bettyvschmartz/32/81_2.png) [@bettyvschmartz](https://onlykey.discourse.group/u/bettyvschmartz)\ **Post date:** [August 23, 2021, 4:41pm UTC](https://onlykey.discourse.group/t/hardware-physical-buttons/159/25 "2021-08-23T16:41:45Z")
> [@p0lt](#): > > i printed a couple of those cases from thingiverse with petg. > been working great for more than 6 months no wear or tear. > i do only wear on chain around neck so not much wear to begin with I also have used this for a while and have found it great. The silicon case is good but I had to buy a few and I found this to be more robust. If OnlyKey made a hard case I’d happily buy. – bvs ---
**Author:** ![return\_0spun\_Frame](https://avatars.discourse-cdn.com/v4/letter/r/ccd318/32.png) [@return\_0spun\_Frame](https://onlykey.discourse.group/u/return_0spun_Frame)\ **Post date:** [November 17, 2021, 4:19pm UTC](https://onlykey.discourse.group/t/hardware-physical-buttons/159/26 "2021-11-17T16:19:10Z")
That’s a really cool design. Do you have a file I could use to print one like that? ---
**Author:** ![p0lt](https://avatars.discourse-cdn.com/v4/letter/p/4da419/32.png) [@p0lt](https://onlykey.discourse.group/u/p0lt)\ **Post date:** [November 17, 2021, 10:31pm UTC](https://onlykey.discourse.group/t/hardware-physical-buttons/159/27 "2021-11-17T22:31:26Z")
the link is back near the top of the thread but here it is again > **[OnlyKey Case by kinyptor](https://www.thingiverse.com/thing:2844389)** > > After using my Onlykey every day for the last year and a half, the silicone case finally ripped. > Unable to find anything on Thingiverse but Yubikey cases, I decided to design this for all the Onlykey users out there. > Should be fairly straight-forward... ---
**Author:** ![return\_0spun\_Frame](https://avatars.discourse-cdn.com/v4/letter/r/ccd318/32.png) [@return\_0spun\_Frame](https://onlykey.discourse.group/u/return_0spun_Frame)\ **Post date:** [November 17, 2021, 10:48pm UTC](https://onlykey.discourse.group/t/hardware-physical-buttons/159/28 "2021-11-17T22:48:45Z")
Thanks for the replay bro. I’ve seen that case (file) but the one in the pic has cool pattern on top of it. How did you make that (the pattern)? ---
**Author:** ![p0lt](https://avatars.discourse-cdn.com/v4/letter/p/4da419/32.png) [@p0lt](https://onlykey.discourse.group/u/p0lt)\ **Post date:** [November 17, 2021, 11:03pm UTC](https://onlykey.discourse.group/t/hardware-physical-buttons/159/29 "2021-11-17T23:03:34Z")
thats is just how the 3d printer layed down the filament for the print… from the picture looks like i used 5 walls for that setting. ---
**Author:** ![return\_0spun\_Frame](https://avatars.discourse-cdn.com/v4/letter/r/ccd318/32.png) [@return\_0spun\_Frame](https://onlykey.discourse.group/u/return_0spun_Frame)\ **Post date:** [November 18, 2021, 5:22am UTC](https://onlykey.discourse.group/t/hardware-physical-buttons/159/30 "2021-11-18T05:22:08Z")
oh right… 👍 Thanks for the info 🙂 [Previous page](https://onlykey.discourse.group/t/hardware-physical-buttons/159.md?page=1)